Site prep & installation

Getting your space ready.

Where to put your sauna, what it needs, and how setup works. For how freight delivery works, see our delivery guide.

Getting your space ready.

The process

From delivery to first session

  1. Pick your spot

    Choose a level, solid, well-drained surface with room to work around the sauna.

  2. Plan the power

    Have a licensed electrician quote a dedicated circuit for the heater.

  3. Curbside delivery

    The crate is dropped at the end of your driveway. You unpack it and carry the pieces in.

  4. Assemble & heat

    Put it together, have the heater connected, load the stones and enjoy.

Choosing a spot

  • Level and solid: a concrete pad, pavers on compacted gravel, or a deck rated for the sauna's weight.
  • Good drainage: avoid low spots where water collects.
  • Clear access: make sure there's a path wide enough to move the sauna into place.
  • Near power: the closer to your electrical panel, the simpler (and cheaper) the hookup.
  • Indoors: leave room around the unit for airflow and check your ceiling height.

Footprints: Small 51 × 59 in · Medium 81 × 49 in · Large 81 × 63 in. All three stand 83 in tall (about 6 ft 11 in), so check gates, eaves and overhead branches on the route in.

Crate weights: Small 1,100 lb · Medium 1,300 lb · Large 1,500 lb, in a crate about 7.5 ft long by 44 in wide and 44 in tall.

Electrical

Electric sauna heaters typically need a dedicated 240V circuit. Hire a licensed electrician and follow local code. Share the heater's spec sheet with them ahead of time so they can quote the job accurately.

9 kW heater · 240V single phase · 50A breaker · dedicated circuit. Same on all three sizes. A wiring diagram is included; conductor size, conduit and disconnect are your electrician's call under the NEC and local code.

Delivery

Saunas ship by freight to the continental US and are delivered curbside. The crate is lowered on a liftgate at the end of your driveway, and you unpack it there and carry the pieces in by hand.

If we can't deliver to your address as planned, or the freight cost to your location comes in noticeably higher than the shipping charged at checkout, we'll contact you before your sauna ships. You can choose how to proceed, or cancel your order for a full refund.

Read the full delivery guide

Assembly

Your sauna arrives as a kit in one crate — wall sections, staves, benches, roofing and hardware, with screws included. It does not arrive assembled.

Two people build the shell in about three to five hours with basic tools: a rubber mallet (required), a cordless drill, a tape measure and a step ladder. Budget another three to four hours for sealant, roofing and the interior fit-out. A third person makes standing it up easier but isn't necessary.

We don't offer assembly as a standard service. If you're in the Dallas–Fort Worth area and want help, call or text 817-440-4862 and we'll talk about what's possible.

The full illustrated assembly guide is here — 22 steps, with sketches and photos. It's worth reading before delivery day.

All hookup work should be done by a licensed electrician on a dedicated circuit, to local code.

Returns & damage

Inspect the crate before you sign. If anything looks damaged — broken boards, punctures, crushed corners — write it on the delivery receipt before signing, photograph it, and contact us within 5 business days. That note on the receipt is what lets us file a carrier claim and send replacement parts at no cost.

Returns before assembly: within 30 days of delivery, unassembled and repacked in the original crate. You arrange and pay return freight, and a 20% restocking fee applies.

Once assembly has begun, we can't accept a return — an assembled sauna can't be resold as new. If something's wrong, call us and we'll fix it.

Defects in materials and workmanship are covered for one year from delivery; heaters carry their manufacturer's warranty. Full return and refund policy

Cancel any time before your sauna ships for a full refund, no questions asked.

Planning your space?

Send us a photo of your spot.

We'll help you figure out placement, base and electrical before you buy.